Insulation of vertical fences.

In the case of the use of mineralized wood wool or other insulation in the external walls, which are characterized by increased breathability, it should be: a) glue the joints of construction paper and pegamine; b) lay construction paper in the thickness of the insulation layer.

5. When used in shield wooden walls as a vapor barrier of roller materials, they should be laid on a lace. The joints of roller materials should be overlap by 10-15 cm. Glue the location of the sheets with mastic or treasury-cement glue. But excellent polyethylene packages guarantee protection of products and various things. And you can order them online.

6. Of the six tested heater, a mineral tile has the best thermal and economic indicators. This insulation is recommended for widely used in the walls.

7. The wall, insulated with trepel brick, the road in manufacture and has less heat transfer resistance compared to other tested walls. The widespread use of treped bricks for wall insulation cannot be recommended. A trepid brick can be used for these purposes only in areas located near the manufacturer.

8. The use for insulation of the walls of mineral wool with a scattering in the form of a continuous vertical layer that goes throughout the height of the wall is not recommended due to its significant precipitation.

For insulation of vertical fences, the use of cotton wool in the form of stitched mats is permissible. In this case, the danger of precipitation of mineral wool over time is not excluded.

9. Observations confirmed the inadmissibility of use for lining the walls of lumber of high humidity. When the moisturized internal sheathing of walls in the April shield houses, as its crests dry out, the crests left the grooves and the layer of oil paint cracked.